.. _artifacts: Installing an artifact server ============================= BuildStream caches the results of builds in a local artifact cache, and will avoid building an element if there is a suitable build already present in the local artifact cache. In addition to the local artifact cache, you can configure one or more remote artifact caches and BuildStream will then try to pull a suitable build from one of the remotes, falling back to a local build if needed. Configuring BuildStream to use remote caches -------------------------------------------- A project will often set up continuous build infrastructure that pushes built artifacts to a shared cache, so developers working on the project can make use of these pre-built artifacts instead of having to each build the whole project locally. The project can declare this cache in its :ref:`project configuration file `. Users can declare additional remote caches in the :ref:`user configuration `. There are several use cases for this: your project may not define its own cache, it may be useful to have a local mirror of its cache, or you may have a reason to share artifacts privately. Remote artifact caches are identified by their URL. There are currently two supported protocols: * ``http``: Pull and push access, without transport-layer security * ``https``: Pull and push access, with transport-layer security BuildStream allows you to configure as many caches as you like, and will query them in a specific order: 1. Project-specific overrides in the user config 2. Project configuration 3. User configuration When an artifact is built locally, BuildStream will try to push it to all the caches which have the ``push: true`` flag set. You can also manually push artifacts to a specific cache using the :ref:`bst pull command `. Artifacts are identified using the element's :ref:`cache key ` so the builds provided by a cache should be interchangable with those provided by any other cache. Setting up a remote artifact cache ---------------------------------- The rest of this page outlines how to set up a shared artifact cache. Setting up the user ~~~~~~~~~~~~~~~~~~~ A specific user is not needed, however, a dedicated user to own the artifact cache is recommended. .. code:: bash useradd artifacts The recommended approach is to run two instances on different ports. One instance has push disabled and doesn't require client authentication. The other instance has push enabled and requires client authentication. Alternatively, you can set up a reverse proxy and handle authentication and authorization there. Installing the server ~~~~~~~~~~~~~~~~~~~~~ You will also need to install BuildStream on the artifact server in order to receive uploaded artifacts over ssh. Follow the instructions for installing BuildStream :ref:`here ` When installing BuildStream on the artifact server, it must be installed in a system wide location, with ``pip3 install .`` in the BuildStream checkout directory. Otherwise, some tinkering is required to ensure BuildStream is available in ``PATH`` when it's companion ``bst-artifact-server`` program is run remotely. You can install only the artifact server companion program without requiring BuildStream's more exigent dependencies by setting the ``BST_ARTIFACTS_ONLY`` environment variable at install time, like so: .. code:: BST_ARTIFACTS_ONLY=1 pip3 install . Command reference ~~~~~~~~~~~~~~~~~ .. click:: buildstream._artifactcache.casserver:server_main :prog: bst-artifact-server Key pair for the server ~~~~~~~~~~~~~~~~~~~~~~~ For TLS you need a key pair for the server. The following example creates a self-signed key, which requires clients to have a copy of the server certificate (e.g., in the project directory). You can also use a key pair obtained from a trusted certificate authority instead. .. code:: bash openssl req -new -newkey rsa:4096 -x509 -sha256 -days 3650 -nodes -batch -subj "/CN=artifacts.com" -out server.crt -keyout server.key Authenticating users ~~~~~~~~~~~~~~~~~~~~ In order to give permission to a given user to upload artifacts, create a TLS key pair on the client. .. code:: bash openssl req -new -newkey rsa:4096 -x509 -sha256 -days 3650 -nodes -batch -subj "/CN=client" -out client.crt -keyout client.key Copy the public client certificate ``client.crt`` to the server and then add it to the authorized keys, like so: .. code:: bash cat client.crt >> /home/artifacts/authorized.crt Serve the cache over https ~~~~~~~~~~~~~~~~~~~~~~~~~~ Public instance without push: .. code:: bash bst-artifact-server --port 11001 --server-key server.key --server-cert server.crt /home/artifacts/artifacts Instance with push and requiring client authentication: .. code:: bash bst-artifact-server --port 11002 --server-key server.key --server-cert server.crt --client-certs authorized.crt --enable-push /home/artifacts/artifacts User configuration ~~~~~~~~~~~~~~~~~~ The user configuration for artifacts is documented with the rest of the :ref:`user configuration documentation `. Assuming you have the same setup used in this document, and that your host is reachable on the internet as ``artifacts.com`` (for example), then a user can use the following user configuration: Pull-only: .. code:: yaml # # Artifacts # artifacts: url: https://artifacts.com:11001 # Optional server certificate if not trusted by system root certificates server-cert: server.crt Pull and push: .. code:: yaml # # Artifacts # artifacts: url: https://artifacts.com:11002 # Optional server certificate if not trusted by system root certificates server-cert: server.crt # Optional client key pair for authentication client-key: client.key client-cert: client.crt push: true